How To Stop Car Clear Coat From Peeling

DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.

Factory Direct. In Stock & Ships Same Day!

Size *

4oz - Gloss

Pint - Gloss

Quart - Gloss

Gallon - Gloss

5 Gal Pail - Gloss

Add Paint Saver? *

No

Yes

Part #: 8

• Details
• Customer Reviews
• Questions and Answers

• Formulated to Apply Directly Over Other Coatings or Direct To Metal (DTM)!
• Permanent high solids (over 60%) and low VOC's Clear Coat.
• Ideal for Direct To Metal (DTM) applications - No Additives Needed!
• A Moisture Cured Urethane which is an advanced coatings technology offering durability, flexibility, corrosion and chemical resistance.
• Apply directly to Painted Surfaces with Minimal Surface Prep.
• Incredibly tough and hard like no other clear coat on the market.
• Water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
• Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun.
• Unlike normal two part (2K) coatings, no hardener is needed. You can just stir well and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
• Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part (1K) or Two Part (2K) paints. It can also be applied to Non-Ferrous metals including Aluminum, Alloys, Brass, Chrome and Copper.
• Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone.
• Graffiti Resistant: because of its chemical resistance, graffiti just won't stick and can be removed simply with a solvent soaked rag.
• Great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 300° Fahrenheit.

• Over 60% Solids which Means Ultra Durability
• Direct To Metal Application - No Additives Needed
• Ideal Clear Coat for Fiberglass Surface and Carbon Fiber Surfaces.
• Apply Directly to Painted Surfaces
• Single Part Formula
• Tougher, Harder and Easier To Use than 2 Part (2K) Clear Coats
• Seals and Coats both Paints & Metals
• Self Leveling (No Brush Marks)
• Simple Brush, Spray or Roll Application
• Permanent UV Stability - Does Not Yellow or Fade
• High Chemical Resistance (including some fuels)
• High Temperature resistance (300F) suitable for Motors and Brake Calipers
• Once fully cured, DiamondFinish Clear is 100% non-toxic.
• Graffiti Proof
• Re-coat in 1-2 hours
• Seals Ferrous and Non-Ferrous metals

• Protecting steel and plastic bumpers paint work.
• Ideal for clear coating Fishing Lures and Crankbaits
• Automotive aluminum fitting, fuel tanks and parts.
• Protecting existing paint work from physical damage.
• Stopping chemical attack from acids and alkalis on existing paint work.
• Protecting paint work from all fuels.
• Ideal for clear coating Tumblers.
• Ideal for clear coating custom Coasters.
• Used by Boaters to Revitalize Clear Coat on Fiberglass Boats - Boat Bottoms and Boat Topsides.
• Excellent Clear Coat to Clear Coat Aluminum John Boats.
• Graffiti Protection.
• Custom Automotive Refinish.
• Marine internal and external Refinish.

Theoretical coverage at one mil (25 µm) is 400 sq.ft. per gallon/9.8 m² per liter. Recommended thickness of at least two mils (50 µm) would require at least two full coats. At least three coats recommended for marine applications. Material losses during mixing and application will vary and must be taken into consideration. Please expect up to 50% less coverage on bare wood, rough or sandblasted surfaces.

• 4oz of DiamondFinish Clear should cover 12.5 sq. ft. single coat coverage.
• Pint of DiamondFinish Clear should cover 50 sq. ft. single coat coverage.
• Quart of DiamondFinish Clear should cover 100 sq. ft. single coat coverage.
• Gallon of DiamondFinish Clear should cover 400 sq. ft. single coat coverage.
• 5 Gallon Pail of DiamondFinish Clear should cover 2000 sq. ft. single coat coverage.

DiamondFinish Clear - Showing the Insane Durability and Flexibility of this Clear Coat

DiamondFinish Clear is a 1K Clear Coat that Lays Out Like Glass

DiamondFinish Clear is a 1K Clear Coat that is the Preferred Clear Coat of Fishing Lure Makers!

Watch as an oxidized fiberglass boat is easily cleaned up using KBS Klean getting the surface ready to clear coat
the oxidized fiberglass with DiamondFinish Clear from KBS Coatings.

Watch as an oxidized fiberglass boat is easily clear coated using DiamondFinish Clear from KBS Coatings.

Still the best

I've been using Diamond Finish for a long time to clear coat my fishing lures. I have found it is much clearer than other types/brands. It also doesn't seem to bubble as much as the others. I will keep on using it.

Did you find this helpful? 

Reviewed by: Don from Middleton, TN on 11/23/2021

Don

5

protection perfection

I use this product to "dip" fishing lures. once dry I have a perfectly protected paint finish. impossible to ever know the diamond coating has been applied except for the incredible protection it provides over the years.

Did you find this helpful?  0 of 1Found Helpful

Reviewed by: Lenny from Leesburg on 10/27/2021

Lenny

5

Lure coating

Great stuff leaves a durable finish for my custom painted lures!

Did you find this helpful?  1 of 2Found Helpful

Reviewed by: Chad from Belleview, Missouri on 10/6/2021

Chad

5

Crazy Amazing Diamond Finish Clear

Clear Diamond Finish is amazing! Great product. It's important to read and follow all the documentation that KBS provides with the product package. The information will truly help keep you from getting frustrated. I found that laying a single, small piece of wax paper on top of can prior to closing the lid will help prevent the lid from sticking to can. Do not double the wax paper because the lid will not stay closed. The lid closes and will stay closed using one single, small piece. The plastic wrap was too thin to work with for me; however, I tried it first. Per the instructions, always make sure the top of can groove for the lid is clean from any drips or drops of Diamond Finish prior to closing lid. I don't recommend using a cheap brush. A good quality, soft, medium to thick brush worked well for me. These types of brushes allowed the product to spread evenly and easily without seeing brush strokes on items; it's worth it. I had to practice a couple of times applying the correct amount of "product and brush pressure" to achieve a beautiful result. The technology technicians provided excellent customer support and answered every one of my questions. They were extremely helpful and professional. That's hard to experience this day in time. The Diamond Finish is a little pricey. I'd purchase more if it was a bit lower. I love the smaller cans. They are much easier for me to work with. My only recommendation is to allow customers to purchase several 4 oz cans for a lot less cost. The product is excellent.

Did you find this helpful?  2 of 2Found Helpful

Reviewed by: Thrilled from Georgia on 10/2/2021

Thrilled

5

disappointed

directions for use is confusing for non pros. I used high quality foam roller and followed direction I think to the letter. It bubbled really bad. Sanded off, and tried to spray it on with quality gun. Even after recommended thinning it was not going on evenly. I went back to roller. no bubbles but very hard to get on evenly. I went slow and did not over work it as instructions say, but hard to get it spread well and not roll it to a certain point. after getting roller loaded it goes on thick to start then gets thinner as product goes on. Then heavy after reloading roller. Not supposed to over roll it so getting it even is hard. Ended with very orange peel effect, and weak spots. I would just use paint store clear coat in future. places where I used a high quality brush to do tight spots came out great. super smooth and clear. Customer service did respond by phone, and gave me some pointers for second try so no complaints there. I have done several boats and cars in past so not a newbie at how to do this, so I would say if your not a pro it is very hard to get a good result. Their video is very short and and does not show doing large sections or what it looks like after it cures.

Did you find this helpful?  0 of 1Found Helpful

Reviewed by: fred brink from Leland on 9/15/2021

fred brink

2

KBS Dimond Clear

Product is amazing as always. I use this to clear all my lures. Super easy to use and easy to remove air bubbles if needed. Shipped supper fast.

Did you find this helpful?  1 of 1Found Helpful

Reviewed by: Matthew P Rawlins from Warren on 8/5/2021

Matthew P Rawlins

5

Awesome

Great coverage for my copper backsplash I just installed behind my stove which just installed when redoing my kitchen/love the finish of the Diamond Clean

Did you find this helpful? 

Reviewed by: Geoff from Minneapolis, Minnesota on 7/8/2021

Geoff

5

River Rock - Tough As Nails

They are building a sensory garden for autistic and special needs students in memory of my wife at the elementary school where my wife used to work. We painted river rock and needed to protect the paint and this product was outstanding! Great coverage with no brush marks and is tough as nails.

Did you find this helpful? 

Reviewed by: Bob F from Churchville, Pa on 6/30/2021

Bob F

5

Amazing

I was a little worried at first using the KBS Diamond Finish as I was applying it to wood. I contacted the company and after a very pleasant conversation and a few laughs I was comfortable. I have used the KBS Rust Seal and the Top Coat in the past and have been a be promoter of the brand. For this project I wanted to continue to support the company but didn't want to mess up the outcome as I spend many hours working on it. Now that it is finished I am a big believer in the KBS company. I can't thank them enough. The Diamond Finish out did it's self. This product was easy to apply and finished my project off completely. I would recommend this product time and time again as well as the business.

Did you find this helpful?  0 of 1Found Helpful

Reviewed by: Jim from New Jersey on 6/11/2021

Jim

5

Incredible Clear Coat

Thanks for the great product!

Did you find this helpful?  2 of 2Found Helpful

Reviewed by: Slab Custom Lures from SE PA on 6/9/2021

Slab Custom Lures

5

Awesome!

I was using UV clear coat on all my custom painted lures but ran into a problem and the finished product was not what I wanted. The UV was leaving bumps along the side of the lures. The company gave no solution to my problem so I decided to try KBS. All I can say is this stuff is awesome! The finish on the lures is like glass and I very pleased. Yes, it does take longer to dry but it's worth the results you will receive.

Did you find this helpful?  2 of 2Found Helpful

Reviewed by: Joy Adams from MARION on 6/8/2021

Joy Adams

5

Amazing finish

Such a wonderful product, I've tried using other clears and none even come close to ease of use along with an amazing g finish. I did have to thin mine a bit just to add working time, but in Pa this time of year it's either humid or raining. This is the only clear I will use from now on!

Did you find this helpful?  1 of 1Found Helpful

Reviewed by: Slab Custom Lures from Pottstown, Pa on 6/8/2021

Slab Custom Lures

5

Beast

Placed on grill and bumper.

Did you find this helpful?  1 of 2Found Helpful

Reviewed by: Nellie from Wylie tx 75098 on 6/2/2021

Nellie

5

Incredible Clear Coat

DiamondFinish Clear is Magic!

Did you find this helpful?  2 of 3Found Helpful

Reviewed by: Vinn K from Garden City, MI on 5/17/2021

Vinn K

5

Kbs coating

Very fast shipment. Product is excellent for clear coating fishing lures. Strong finish. Will not yellow and waterproof

Did you find this helpful?  1 of 2Found Helpful

Reviewed by: Fishcatcher from Erwin on 4/27/2021

Fishcatcher

5

A unique use case - public art sculpture

I reached out to KBS Support before ordering Clear Diamond Finish as I had some questions about my specific project. They responded quickly and thoroughly which was great. I ordered a quart and it shipped up and arrived in a few days, which was also great. Given that I was applying this to a fiberglass sculpture of a duck (for an outdoor public art event) I was not using for the traditional purpose - and have not done this before. I have to say this was the trickiest part of this process - as trying not to go back and brush/roll over areas on an object with so many curves and continual surfaces was tricky. (Spraying it might have been better for this project, but I did not have the equipment or safe area to do it that way). After two coats were applied, I ended up letting it dry for a little over 24 hours and then sanded it down some to smooth out areas where I had brush marks showing up. Then I applied two more coats, for a total of 4. And that left me with just a little bit of the quart left over when I was finished. I allowed it to fully cure for over a week - and then moved forward with adhering over 30,000 rhinestones onto the sculpture. For the beak/wings I sanded the clear coat finish (per the KBS teams suggestion) so the adhesive had something to grip onto. For areas like the fireworks - I used a Dremel bit and hand "scuffed/scratched" the surface under anywhere a stone was placed to give it some chance of gripping on as well. Fire Quackers as I titled it, goes on display in May 2021 - Sept. So fingers crossed it holds up well with weather and public interaction.

Did you find this helpful?  3 of 4Found Helpful

Reviewed by: RichG from Joliet on 4/13/2021

RichG

5

Great product and great tech help

Excellent product. Sprayed well reducing at 20% even then it had fantastic coverage. I got 4 full coats for a total of 200 sq feet out of two quarts. Extremely clear and cures very well. Does run if not paying attention but very easy to scrape with razor blade once it sets up. Doesn't run as easy as other clears. Very forgiving clear coat. I love it and my buddy wants me to spray his boat after seeing mine. I would rate a 5 but price made me go 4 stars.

Did you find this helpful?  1 of 2Found Helpful

Reviewed by: Mike from Springtown, TC on 3/2/2021

Mike

4

Shin e and Toughness

I am a custom lurer artist and for the last three months I have been using KBS Dimond Clear Finish to seal coat the lures once they have been painted and I am 150% more citified with KBS than I was with the product I was previously using. Less drying time, more shine and a lot stronger bond and most important, it does not turn yellow on you at all. Highly recommend KBS to every custom lures painter, you will not regret it at all!!!

Did you find this helpful?  2 of 3Found Helpful

Reviewed by: Rev. Juan Felipe from Chicago on 2/23/2021

Rev. Juan Felipe

5

Dipped in DiamondFinish Clear

Custom Lure Dipped in DiamondFinish Clear.

Did you find this helpful?  1 of 2Found Helpful

Reviewed by: Kevin B from USA on 2/22/2021

Kevin B

5

clear as glass

the best way to use this product is to follow there directions. take the time between coats

Did you find this helpful?  1 of 2Found Helpful

Reviewed by: steve from florida on 2/10/2021

steve

5

Good but..

Sprayed good, was thinned at 30% with KBS thinner, has stayed "soft" for over a week now, not able to sand as the instructions say I could.. Hopefully it will cure out.... **KBS Coatings Response: Please increase the humidity in the garage with some wet blankets or wet cardboard. Humidity is what cures DiamondFinish Clear and in the winter the humidity is very low.**

Did you find this helpful?  2 of 3Found Helpful

Reviewed by: BATComm1 from BROKEN ARROW on 2/9/2021

BATComm1

4

Efficient way to top coat

I deep the lures into KBS very slowly, i rotate then a bit to release micro bubbles, and i take them out slowly. I only coat once. The level of gloss is perfect. The coating and self levelling is also very good. Sometimes i still get micro bubble but, unlike with epoxy, i cannot pop them with heat. So far, i have not fished yet the lures coated with KBS, so i do not know if the coating is as tough as epoxy.

Did you find this helpful?  1 of 2Found Helpful

Reviewed by: Fulvio from Port Saint Lucie on 2/2/2021

Fulvio

4

The best clear coat

It might be a bit more expensive then other brand but hands down there is no comparison and quality this is some of the best clear you will ever use

Did you find this helpful? 

Reviewed by: Jerry carter from Muskogee Oklahoma on 2/2/2021

Jerry carter

5

clear diamond and paint saver

I am new at painting lures and needed a tough finish and easy to use. the diamond finish is exactly what I needed. Since I want be using a lot for now I used the paint saver to keep it safe. the paint saver is worth the money.

Did you find this helpful? 

Reviewed by: wood from church hill, tn on 1/26/2021

wood

5

Fishing Lures Coated with DiamondFinish Clear

I custom paint fishing lures and coat them with kbs.

Did you find this helpful?  1 of 1Found Helpful

Reviewed by: Brandon B from Menifee, CA on 1/26/2021

Brandon B

5

Q: Can this clear coat be used over laquer and enamel paint?

A: Yes, DiamondFinish Clear can be applied over fully cured lacquer or enamel paints.

Was this answer helpful?  173 of 181  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (9/13/2013)

Q: What is the recommendation for wet sanding and buffing times?

Asked by: Rob - 10/14/2013

A: DiamondFinish Clear can be cut and polished as a normal Clear Coat after 24 hours under normal conditions.

Was this answer helpful?  104 of 110  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (11/11/2013)

Q: Can you use Diamondfinish Clear Coat on 1986 fiberglass Bass boat top plate? Has been wet sanded.

Asked by: Gohmert - 9/7/2013

A: Yes. Wipe the fiberglass surface down with KBS Klean. Allow to dry. Then apply the DiamondFinish Clear. It would be best to apply 2-3 coats for a marine application.

Was this answer helpful?  77 of 86  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (9/8/2013)

Q: Does the clean diamond finish clear coat come in a matte or satin finish?

Asked by: Ryan Pitman - 11/11/2013

A: At this time, the DiamondFinish Clear comes in a Gloss Finish. However, you can lightly sand the DiamondFinish Clear with steel wool after 24 hours to knock down the sheen.

Was this answer helpful?  65 of 73  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (11/11/2013)

Q: Can diamond finish clear be used over rust seal? I'm looking to use rust seal as a color base coat on some automotive components (steering rack, transmission, differential...etc) and use clear to provide the UV protective layer/topcoat

Asked by: Carlton Brown - 10/28/2013

A: We do not recommend putting DiamondFinish Clear over RustSeal because although DiamondFinish Clear is absolutely UV stable, DiamondFinish Clear does not block the UV rays from getting through to the RustSeal. Over an extended period of time, DiamondFinish Clear can delaminate from RustSeal when exposed to prolonged sunlight.

We always recommend a solid color UV stable top coat paint (such as BlackTop or KBS Maxx) over RustSeal if RustSeal will be exposed to sunlight.

Was this answer helpful?  51 of 62  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (11/11/2013)

Q: Does it work over wood?

Asked by: Bobby Swigart - 4/14/2014

A: Yes, the DiamondFinish Clear is used over wood all the time and that is an ideal application. Check out the complete directions for more application information.

Was this answer helpful?  13 of 13  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (4/14/2014)

Q: Can Diamond Clear be thinned for spraying? And what do you thin it with.

Asked by: Bobby Swigart - 4/14/2014

A: Yes, you can thin DiamondFinish Clear 5-30% with KBS #1 Thinner for spray applications.

Was this answer helpful?  11 of 11  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (4/14/2014)

Q: Can DiamondFinish Clear be used over water based paint?

Asked by: jason larson - 6/12/2014

A: Yes, DiamondFinish Clear can be painted over a water based paint as long as that coating is fully cured. As always, do a small inconspicuous test area first.

Was this answer helpful?  8 of 8  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (6/12/2014)

Q: What is the best way to store this after you open the can? Is this a moisture cured urethane

Asked by: Jon - 7/14/2014

A: Here is what we recommend:

Dispense a working amount of DiamondFinish Clear into a separate container (steel or glass is best) and seal original can immediately. Keep can groove free of paint by using a scoop or KBS Paint Spout. Use plastic wrap between the lid and the top of the can to stop metal to metal contact as DiamondFinish Clear can permanently seal the lid. Unused paint should NEVER be put back into the can as it will shorten can shelf life and cause pressure build-up possibly popping the lid. If there is any trouble resealing the can lid tightly, transfer and store DiamondFinish Clear in a proportionally sized clean glass jar or new paint can. Always store in a cool dry place.

Was this answer helpful?  8 of 9  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (7/14/2014)

Q: Can this be applied over rusted metal? I have some vintage items that are painted and have rusted areas wich Iwould like to try and preserve as they are.

Asked by: Jason - 7/14/2014

A: Yes, you can apply DiamondFinish Clear over rusted metal to keep that vintage look. You can even lightly sand the DiamondFinish Clear with steel wool once it has cured to take some of the gloss away.

Was this answer helpful?  7 of 7  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (7/14/2014)

Q: Can DiamondFinish Clear be applied over hydrographics?

Asked by: David Holland - 12/7/2013

A: Yes, as long as the hydrographic is completely cured, DiamondFinish Clear will go over it. We have had several customers use DiamondFinish Clear over hydrographics on helmets. As always, do a test area first.

Was this answer helpful?  6 of 6  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (12/11/2013)

Q: Will this product adhere to a plastic like a hard hat? Also, will it go over vinyl stickers without harming them?

Asked by: Mike - 7/29/2014

A: Yes, DiamondFinish Clear almost always adheres very well to plastics especially high solids plastics. And Yes, DiamondFinish Clear almost always goes over vinyl stickers really well and protects the sticker. This is a very common application. As always, test an inconspicuous area first.

Was this answer helpful?  6 of 6  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (11/25/2014)

Q: Will the clear coat chip?

Asked by: Harlan Pierson - 12/31/2013

A: Once fully cured, the DiamondFinish Clear is virtually chip-proof under even extreme circumstances.

Was this answer helpful?  5 of 5  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (2/15/2014)

Q: I would like to apply Diamond Clear over clean weathered paint with light rust showing ("patina"). Is this an appropriate product for this and if so, what prep is recommended? Thank you. WSH

Asked by: whitney - 1/15/2015

A: Yes, this is a common application. Wipe down the surface with a 1 part KBS Klean to 9 parts water solution. If you desire a more satin finish, you can hit the surface with steel wool after the DiamondFinish Clear has cured for 24 hours.

Was this answer helpful?  5 of 6  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (1/15/2015)

Q: Can this product be used as a spray?

Asked by: rfhod - 11/19/2014

A: Yes, you can spray DiamondFinish Clear. When spraying, 10%-15% is normally adequate. DiamondFinish can be thinned up to 30%. Use KBS #1 Thinner. When spraying: Spray pressure of 35-45 psi, 250-330 kpa for siphon/pot guns and 25-35psi, 170-250 kpa for gravity/top container guns. Complete directions can be found here.

Was this answer helpful?  4 of 4  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (11/25/2014)

Q: Can this product be used on industrial equipment? Are there any restrictions from using this in food processing areas (non-food contact)?

Asked by: jp schoenberg - 12/4/2013

A: Yes, DiamondFinish Clear is used all of the time on industrial equipment. DiamondFinish Clear is completely non-toxic once cured so it can be used on non-food contact areas.

Was this answer helpful?  3 of 3  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (12/5/2013)

Q: can this be used on carbon fibre ?

Asked by: C A - 2/14/2014

A: Yes, the DiamondFinish Clear can be used on carbon fiber. Clean the surface with KBS Klean diluted 10 parts warm water to 1 part KBS Klean. Scuff with 600-1200 grit sandpaper and and repeat cleaning process. Rinse & allow to thoroughly dry.

Was this answer helpful?  3 of 3  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (2/15/2014)

Q: Can you brush Diamond Finish on Epoxy Resin? If so, would you have to sand the resin first so the clear coat will bond?

Asked by: James Wolanin - 3/6/2014

A: Yes, you can coat over an epoxy resin with DiamondFInish Clear. Just scuff up the epoxy resin with 300 grit to prep the surface. As always, do a test area first.

Was this answer helpful?  3 of 3  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (3/6/2014)

Q: the topcoat is peeling off of my hood on my car, could I lightly sand it and apply this on top of the areas? do you think it would stop the peeling?

Asked by: jacolyn - 4/14/2014

A: Yes, you can lightly sand the area making sure you remove any loose paint. Then clean the area with KBS Klean and coat it with DiamondFinish Clear.

Was this answer helpful?  3 of 3  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (4/14/2014)

Q: I want to paint some f250 wheels black and clearcoat with the diamond finish clear, what size would I need?

Asked by: Derek - 5/8/2014

A: A pint of DiamondFinish Clear should be enough and a quart would easily cover the wheels with 2 coats.

Was this answer helpful?  3 of 3  Customer(s) found this Answer helpful.

Answer provided by: KBS Coatings (5/8/2014)

How To Stop Car Clear Coat From Peeling

Source: https://www.kbs-coatings.com/diamondfinish-clear.html

Posted by: masonalfulthe.blogspot.com

Share this post